Implementasi 4QC Tools Dan IOT Sebagai Pengendali Kegagalan Produk Usaha Batik Fendy, Klaten
DOI:
https://doi.org/10.31334/abiwara.v2i1.1051Keywords:
Quality control, Histogram, Pareto Diagram, p Control Chart, Fishbone DiagramAbstract
The study was conducted to identify the types of product defects, monitor the production process, and map the causes of product defects in the Batik Fendy Klaten Business, Central Java. The analysis method is carried out in 4 stages, namely making a histogram, pareto diagram, analyzing the control map p, and mapping the cause of product defects with a fishbone diagram. Primary and secondary data analysis in the form of data on the number of production and the number of defective products from November 2018 to October 2019. The results showed that the torn cloth is a dominant type of disability with a percentage of 32% of the total product defects, depicting the control chart p there are 7 out of 12 observation periods occurred processes that exceed the lower control limit, namely in November, December 2018, May, September, and October 2019 are under the lower control limit, whereas in November 2018, February, March and April 2019 are above the upper control limit, identification of the causes is found carelessness, manual method of cutting, material not according to criteria, and hot ambient temperature galvalume.References
. Bernik, M., & Zusnita, W. O. (2019). METODA PENGENDALIAN KUALITAS UNTUK UMKM. Dharmakarya. https://doi.org/10.24198/dharmakarya.v7i4.14943
. Chen, N., Viho, C., Baire, A., Huang, X., & Zha, J. (2013). Ensuring Interoperability for the Internet of Things: Experience with CoAP Protocol Testing. Automatika ‒ Journal for Control, Measurement, Electronics, Computing and Communications. https://doi.org/10.7305/automatika.54-4.418
. Eskani, I. N., Haerudin, A., Setiawan, J., Lestari, D. W., & Astuti, W. (2019). Batik Fungsional Sebagai Salah Satu Strategi Pengembangan Industri Batik Dalam Memasuki Era Industri 4.0. Prosiding Seminar Nasional Industri Kerajinan Dan Batik 2019, 1–12. Retrieved from https://proceeding.batik.go.id/index.php/SNBK/article/view/17/14
. Heizer, J., Render, B., & Munson, C. (2017a). Principles of Operations Management; Sustainability and Suply Chain Management. In Principles of Operations Management.
. Heizer, J., Render, B., & Munson, C. (2017b). Twelfth Edition Operations Management. In Operations Management.
. Margarette, A., & Pujotomo, D. (2016). Analisis Pengendalian Kualitas Proses Produksi Kain Batik Menggunakan Metode Statistical Process Control (Spc). Universitas Diponegoro.
. Prayudha, J., Pranata, A., & Al Hafiz, A. (2018). Implementasi Metode Fuzzy Logic Untuk Sistem Pengukuran Kualitas Udara Di Kota Medan Berbasis Internet of Things (Iot). Jurteksi, 4(2), 141–148. https://doi.org/10.33330/jurteksi.v4i2.57
. Purnomo, H. (2018). Analisis Pengendalian Produk Cacat dengan Metode Four Quality Control (4QC) Tools. Akademika.
. Riani, L. P. (Universitas N. P. K. (2016). Analisis Pengendalian Kualitas Produk Tahu Putih (Studi Kasus Pada Home Industri Tahu Kasih Di Kabupaten Trenggalek ). Jurnal Akademika.
. Robbi, F. R. (n.d.). Analisis Pengendalian Kualitas dengan Menggunakan Metode Statistical Quality Control untuk Meminimumkan Jumlah Produk Cacat Kain Batik Cap pada Kareumbi Gallery Batik & Bordir Subang Analysis of Quality Control By Using Statistical Quality Control Method . 1104–1110.
. Ross, Westerfield, Jordan, Zhao, Y., Meng, X., Wang, S., … Prince, J. (2017). Opeations Management 12th edition. In Corporate finance. https://doi.org/10.1017/CBO9781107415324.004
. Ruuhwan, Rizal, R., & Karyana, I. (2019). Sistem Kendali dan Monitoring pada Smart Home Berbasis Internet of Things (IoT). Innovation in Research of Informatics (INNOVATICS), 2(October), 43–50. Retrieved from http://jurnal.unsil.ac.id/index.php/innovatics/article/view/877/660
. Sari, I. G. A. A. H., & Sudiartha, G. M. (2019). Pengendalian Kualitas Proses Produksi Kopi Arabika Pada Ud. Cipta Lestari Di Desa Pujungan. E-Jurnal Manajemen Universitas Udayana, 8(4), 2495. https://doi.org/10.24843/ejmunud.2019.v08.i04.p22
. Supriyadi, E. (2018). Analisis Pengendalian Kualitas Produk dengan Statistical Proses Control (SPC) di Pt. Surya Toto Indonesia, Tbk. Jitmi, 1(1), 63–73.
. Sutaryono, A. (2020). Usulan Peningkatan Kualitas Kain Batik Semi Tulis menggunakan Metode Six Sigma. Jurnal Teknik Industri: Jurnal Hasil Penelitian Dan Karya Ilmiah Dalam Bidang Teknik Industri, 5(1), 48. https://doi.org/10.24014/jti.v5i1.6765
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Copyright Notice
Please find the rights and licenses in Abiwara : Jurnal Vokasi Administrasi Bisnis. By submitting the article/manuscript of the article, the author(s) agree with this policy. No specific document sign-off is required.
1.License
The non-commercial use of the article will be governed by the Creative Commons Attribution license as currently displayed on Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
2.Author(s)' Warranties
The author warrants that the article is original, written by stated author(s), has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary written permissions to quote from other sources have been obtained by the author(s).
3.User Rights
Abiwara : Jurnal Vokasi Administrasi Bisnis, spirit is to disseminate articles published are as free as possible. Under the Creative Commons license, Abiwara : Jurnal Vokasi Administrasi Bisnis permits users to copy, distribute, display, and perform the work for non-commercial purposes only. Users will also need to attribute authors and Abiwara : Jurnal Vokasi Administrasi Bisnis on distributing works in the journal and other media of publications.
4.Co-Authorship
If the article was jointly prepared by more than one author, any authors submitting the manuscript warrants that he/she has been authorized by all co-authors to be agreed on this copyright and license notice (agreement) on their behalf, and agrees to inform his/her co-authors of the terms of this policy. Abiwara : Jurnal Vokasi Administrasi Bisnis will not be held liable for anything that may arise due to the author(s) internal dispute. Abiwara : Jurnal Vokasi Administrasi Bisnis will only communicate with the corresponding author.
5.Miscellaneous
Abiwara : Jurnal Vokasi Administrasi Bisnis will publish the article (or have it published) in the journal if the article’s editorial process is successfully completed. Abiwara : Jurnal Vokasi Administrasi Bisnis editors may modify the article to a style of punctuation, spelling, capitalization, referencing and usage that deems appropriate. The author acknowledges that the article may be published so that it will be publicly accessible and such access will be free of charge for the readers as mentioned in point 3.
Every accepted manuscript should be accompanied by "Copyright Transfer Agreement" prior to the article publication.
