Analisis Penggunaan Spesifikasi Bahan Baku terhadap Laba Perusahaan Studi Kasus pada Pt Rimantara Putra Persada

Authors

  • Darno Darno Fakultas Ekonomi dan Bisnis, Universitas Maarif Hasyim Latif, Sidoarjo, Indonesia
  • Eka Nur Laili Fakultas Ekonomi dan Bisnis, Universitas Maarif Hasyim Latif, Sidoarjo, Indonesia
  • Eko Purwanto Fakultas Ekonomi dan Bisnis, Universitas Maarif Hasyim Latif, Sidoarjo, Indonesia
  • Jaya Adi Gama Tengtarto Fakultas Ekonomi dan Bisnis, Universitas Maarif Hasyim Latif, Sidoarjo, Indonesia
  • Kuswana Rama Destian Fakultas Ekonomi dan Bisnis, Universitas Maarif Hasyim Latif, Sidoarjo, Indonesia

DOI:

https://doi.org/10.31334/neraca.v3i1.1965

Keywords:

Raw Material Spesifications, Company Profit and PT Rimantara Putra Persada.

Abstract

The research aims to find out the analysis of the use of raw material specifications on company profits. Sources of date used in this study are primary data and secondary data, where primary data is obtained directly from PT. Rimantara Putra Persada while secondary data were obtained from theory. Data analysis techniques use descriptive qualitative research method is research on the problem in the form of fact that currently exist in the company, while qualitative approach is a research procedure that produces descriptive data in the form of written or oral words from people and observed behaviors. The results of this study explained that the specification of standart type 79 thermo plastic paint raw material resulted in a profit percentage of 0,39%, the full type of 79 resulted in a profit percentage of 0,48% and full type of 98 resulted in a profit percentage of 0,13%. So that the most relative products genere profit to the company, namely the specification of raw materials thermo plastic paint type full 79.    

References

. Bastian, Bustami dan Nurlela. 2009. Akuntansi Biaya. Jakarta: Mitra Wacana Media.

. Carter, William K dan M. F Usry, 2006, Akuntansi Biaya, Buku 1, Edisi Ketigabelas, Penerjemah: Krista, Jakarta: Salemba Empat.

. Carter, William K and Millon F Usry. 2004. Akuntansi Biaya. Jakarta: Salemba Empat.

. Carter, William k dalam Krista. 2009. Akuntansi biaya. Jakarta: Salemba Empat.

. Darno, 2019. Jurnal Pengendalian Harga Pokok Produksi Dengan Metode Full Costing Pada (Alhogbi, 2017) Kerupuk Sari Udang Mbah Oerip Sidoarjo.

. Darno.2020. Jurnal Perbandingan Perhitungan Harga Pokok Produksi Berdasarkan Metode Full Costing Vs Variabel Costing Pada Produksi Sambel Pecel.

. Dewi, Kumala Vera, 2010, Pengaruh Efisiensi Biaya Bahan Baku dan Biaya Tenaga Kerja Langsung Terhadap Laba Bersih Pada PT Perkebunan Nusantara III (Persero) Medan.

. Dewi, Sofia Prima dan Septian Bayu Kristanto, 2016, Akuntansi Biaya, Jakarta: IN MEDIA.

. Dunia, Firdaus Ahmad & Wasilah Abdullah. 2012. Akuntansi Biaya. Jakarta: Salemba Empat

. Gaspersz, Vincent. 2012. All in one production and inventori management edisi 8. Bogor.

. Hansen and Mowen. 2014. Managerial Accounting. Jakarta : Salemba Empat

. Harahap, Sofyan Safri. 2012. Analisis Kritis Atas Laporan Keuangan, edisi Pertama,cetakan ketiga. Jakarta : Raja Grafindo Persada.

. Hamanto, 2006, Akuntansi Biaya-Pokok Produksi (Sistem Biaya Historis),Yogyakarta: BPFE-UGM.

. Hartonoyang, Nugra, 2013, Pengaruh Biaya Produksi terhadap Pendapatan Usaha Perkebunan Kelapa Sawit (Elaeis guineensis Jacq) di Desa Bukit Raya Kecamatan Sepaku Kabupaten Penajam Paser Utara, Jurnal Agribisnis, EPP. Vol. 10 No.1.

. Mulyadi, 2012, Akuntansi Biaya, Yogyakarta: UPP STMI YKPN.

. Sugiyono, 2010, Metode Penelitian Bisnis, Bandung: Alfabeta.

. Supriyono. 2011. Akuntansi Biaya Pengumpulan Biaya dan Penentuan Harga Pokok, Buku 1 Edisi 2. Yogyakarta: BPFE.

. Rahayu. 2012. Pentingnya Perhitungan Harga Pokok Produksi dalam Penentuan Harga Jual pada UD.Rizky Collection. Skripsi

. Rudianto. 2012. Pengantar Akutansi Konsep & Teknik Penyusunan Laporan Keuangan. Jakarta. Erlangga.

. Riwayadi. 2014. Akuntansi Biaya. Pendekatan Tradisional dan Kontemporer. Jakarta : Salemba Empat

. Romney, Marshal B dan Paul John Steinbart. 2014. Sistem Informasi Akuntansi, Edisi ketigabelas, Diterjemahkan oleh : Kikin Sakinah, Nur Safira dan Novita Puspasari.

. Wulandari. 2016. Analisis Biaya Produksi Menggunakan Metode Full Costing Dalam Penentuan Ketepatan Harga Pokok Produksi Pada Pabrik Tahu“SS†di Sidoarjo. Skripsi.

. Yadiati, Wiwin. 2012. Teori Akutansi Suatu Pengantar. Jakarta. Kencana.

Downloads

Published

2021-12-07

Issue

Vol. 3 No. 1: Oktober 2021

Section

Articles

License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. 

Copyright Notice

Please find the rights and licenses in Neraca : Jurnal Akuntansi Terapan, spirit is to disseminate articles published are as free as possible. Under the Creative Commons license, Jurnal Akuntansi Terapan permits users to copy, distribute, display, and perform the work for non-commercial purposes only. Users will also need to attribute authors and Neraca : Jurnal Akuntansi Terapan on distributing works in the journal and other media of publications.

Co-Authorship

If the article was jointly prepared by more than one author, any authors submitting the manuscript warrants that he/she has been authorized by all co-authors to be agreed on this copyright and license notice (agreement) on their behalf, and agrees to inform his/her co-authors of the terms of this policy. Neraca : Jurnal Akuntansi Terapan will not be held liable for anything that may arise due to the author(s) internal dispute. Neraca : Jurnal Akuntansi Terapan will only communicate with the corresponding author.

Miscellaneous

Neraca : Jurnal Akuntansi Terapan will publish the article (or have it published) in the journal if the article’s editorial process is successfully completed. Neraca : Jurnal Akuntansi Terapan editors may modify the article to a style of punctuation, spelling, capitalization, referencing and usage that deems appropriate. The author acknowledges that the article may be published so that it will be publicly accessible and such access will be free of charge for the readers as mentioned in point 3.

Every accepted manuscript should be accompanied by "Copyright Transfer Agreement" prior to the article publication.