Analysis of Potential Risks and Work Accidents Using Hazard Identification, Risk Assessment and Risk Control (HIRARC) Method: a Warehouse Support Case Study of PT. Vale Indonesia Tbk

Greyfi Juita Palengka; Rahmad Inca Liperda

doi:10.31334/logistik.v6i1.1611

Analysis of Potential Risks and Work Accidents Using Hazard Identification, Risk Assessment and Risk Control (HIRARC) Method: a Warehouse Support Case Study of PT. Vale Indonesia Tbk

Greyfi Juita Palengka, Rahmad Inca Liperda

Abstract

Occupational Safety and Health (OSH) aims to maintain and improve the health and safety of the employees. Low levels of workplace safety may result in significant effects on the health of the employees. This research intends to use the HIRARC (Hazard Identification, Risk Assessment, and Risk Control) technique to identify the likely hazards and assess the potential accident or financial loss that the company could incur. A case study of the warehouse of PT Vale Indonesia Tbk, one of the leading mining companies in Indonesia, is used to evaluate the effectiveness of the method. The results show that there are multiple classifications of the level of risk that can be encountered in the warehouse’s operational activities, including extreme, high, moderate and low level. Ultimately, this research proposes a series of improvement recommendations to minimize the occurrence of risks and hazards.

Keywords

Risk; Hazard; Occupational Safety and Health; HIRARC;

Full Text:

PDF

References

K. R. Ririh, M. J. D. Fajrin, and D. R. Ningtyas, “Analisis Risiko Kecelakaan Kerja Dengan Menggunakan Metode HIRARC dan Diagram FISHBONE Pada Divisi Warehouse di PT. Bhineka Ciria Artana,” Semrestek 2020, pp. 8–13, 2020.

A. Nuryono and M. N. Aini, “Analisis Bahaya dan Resiko Kerja di Industri Pengolahan Teh dengan Metode HIRA atau IBPR,” Journal of Industrial and Engineering System, vol. 1, no. 1, pp. 65–74, 2020, doi: 10.31599/jies.v1i1.166.

R. W. Morgan, “Occupational Health Studies,” Wireless Phones and Health, no. August, pp. 225–231, 2002, doi: 10.1007/0-306-46899-9_17.

S. Irawan, T. W. S. Panjaitan, and L. Yenny Bendatu, “Penyusunan Hazard Identification Risk Assessment and Risk Control (HIRARC) di PT. X,” Jurnal Titra, vol. 3, no. 1, pp. 15–18, 2015.

Buchari, N. Matondang, and N. Sembiring, “Work environment engineering using HIRARC and 5S method,” AIP Conf Proc, vol. 1977, no. June 2018, 2018, doi: 10.1063/1.5042864.

S. H. Nugroho, B. Suharjo, A. Bandono, and A. T. Haryanto, “Analysis of Occupational Safety and Health Risk Management on the Indonesian Navy Ship Project Using Hazard Identification, Risk Assessment and Risk Control,” Journal Asro, vol. 11, no. 2, p. 124, 2020, doi: 10.37875/asro.v11i2.275.

L. Widodo, Adianto, and D. I. Sartika, “Implementation of health and safety management system to reduce hazardous potential in PT.XYZ Indonesia,” IOP Conf Ser Mater Sci Eng, vol. 277, no. 1, pp. 0–9, 2017, doi: 10.1088/1757-899X/277/1/012023.

Y. R. B. Sitepu and J. N. Simanungkalit, “Identifikasi Bahaya, Penilaian Risiko, dan Pengendalian Risiko Menggunakan Analisis Metode HIRARC,” Jurnal Penelitian Perawat Profesional, vol. 1, no. November, pp. 89–94, 2019.

R. D. Putra, B. Sukandari, and W. Wihartono, “Risk Management of Occupational Safety and Health in Kri Docking Project Using Hazard Identification, Risk Assessment and Risk Control (Hirarc) Method Case Study: Pt. Pal Indonesia,” Journal Asro, vol. 10, no. 2, p. 76, 2019, doi: 10.37875/asro.v10i2.131.

E. R. Kabul and F. Yafi, “Hirarc Method Approach As Analysis Tools in Formingoccupational Safety Health Management and Culture,” Sosiohumaniora, vol. 24, no. 2, p. 218, 2022, doi: 10.24198/sosiohumaniora.v24i2.38525.

DOI: https://doi.org/10.31334/logistik.v6i1.1611