MENENTUKAN JUMLAH PRODUKSI KAYU BARE CORE MENGGUNAKAN METODE PERENCANAAN ZERO INVENTORY
DOI:
https://doi.org/10.31334/jli.v2i2.312Keywords:
bare core, production plan, zero inventory.Abstract
Encountering the playwood industry competition, companies have to maintain the production flow by producing good quality products, exact production time, and lower production cost. A timber factory that produces bare core in the difficulty to deal with the challenge which is caused by the amount of the work forces that are not proportional with the goods which are being produced, and also bad decision of work time causing the high number of salary to the income of the company become lower. The effort that have to be done are adjust the number of the work force and standard time in order to be proportional to the goods which are going to be produced. Through the zero inventory method, company will only produce goods that are needed by the consumers.The number of the work force will increase when the demand is increasing and will lower the work force when the demand is discreasing, Production plan analysis is conducted to ease the work force number determining process. Hence, the at last the minimum cost production could be determined. The calculation result shows that the costs which are spent by the company on May 2017 is the highest in the amount of Rp 2.306.804 and the lowest cost spent is on December 2017 in the amount of Rp. 1.545.906.000.This strategy is proposed based on the cost calculation which is more precisely spent, resulting to minimized spending and limited without cost calculation, recruiting investment, and workforce training.References
Achmad F.K.W. (2018). Ekspor Kayu Lapis ke Korsel, Pasar Menggiurkan bagi Indonesia.https://ekonomi.kompas.com/read/2018/05/28/165140426/. Diakses 19 Agustus 2018
AgroIndonesia. (2018). Peluang Pasar Kayu Lapis AS.http://agroindonesia.co.id/2018/03/peluang-pasar-kayu-lapis-as/. Diakses 19 Agustus 2018
Andini, R. A., & Simatupang, T. M. A process simulation of inventory planning and control for minute maid pulpy at coca cola. Journal of Int. J. Logistics Systems and Management.Retrieved from http://www.academia.edu
Biegel, John, E. (2000). Pengendalian produksi : Suatu pendekatan kualitatif, Akademika Pressindo, Jakarta.
Buffa, E., S & Rakesh, K. Sarin. (1998). Manajemen operasi dan produksi modern, Jilid 1 edisi kedelapan, Binarupa Aksara, Jakarta.
Carlos, A., & Castro, Z. (2012). Spreadsheets to teach the (RP,Q) model in an inventory management course. Journal of Production Engineering Department, Universidad Eafit Medellin – Colombia.Retrieved from http://www.pomsmeetings.org
Gaspersz, V. (2008). Production planning & inventory control, Gramedia, Jakarta.
Hanczar, P., & Jakubiak, M. (2011). Aggregate planning in manufacturing company – linear programming aproach. Journal of Total Logistic Management, 4, 69–76.
Khairani, D. (2013). Perencanaan dan pengendaliaan produksi, Graha Ilmu, Yogyakarta.
M Lei, Z Yin, S Li, & Q Tan. (2017). Intermittent demand forecasting and inventory control with multiple temporal and cross-sectional aggregation and disaggregation methods. 2017 13th International Conference on Natural Computation, Fuzzy Systems and Knowledge Discovery(ICNC-FSKD), IEEE Xplore.
Nasution, A. H. (2008), Perencanaan dan pengendalian produksi, Graha Ilmu, Yogyakarta.
Sipper, D., & Bulfin, Jr, Robert, L. (1998) Production: planning, control and integration, The McGraw-Hill, USA.
Sinulingga, S.(2009), Perencanaan dan pengengendalian produksi, Graha Ilmu, Yogyakarta.
Sutalaksana, I.Z., & Anggarwisastra, R., & Tjakraatmadja, J. H. (2006). Teknik perancangan sistim kerja, Edisi Kedua, ITB, Bandung.
Downloads
Published
Issue
Section
License
Please find the rights and licenses in Jurnal Logistik Indonesia. By submitting the article/manuscript of the article, the author(s) agree with this policy. No specific document sign-off is required.
1. License
The non-commercial use of the article will be governed by the Creative Commons Attribution license as currently displayed on Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License
2. Author(s)' Warranties
The author warrants that the article is original, written by stated author(s), has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary written permissions to quote from other sources have been obtained by the author(s).
3. User Rights
Jurnal Logistik Indonesia spirit is to disseminate articles published are as free as possible. Under the Creative Commons license, Jurnal Logistik Indonesia permits users to copy, distribute, display, and perform the work for non-commercial purposes only. Users will also need to attribute authors and Jurnal Logistik Indonesia on distributing works in the journal and other media of publications.
4. Co-Authorship
If the article was jointly prepared by more than one author, any authors submitting the manuscript warrants that he/she has been authorized by all co-authors to be agreed on this copyright and license notice (agreement) on their behalf, and agrees to inform his/her co-authors of the terms of this policy. Jurnal Logistik Indonesia will not be held liable for anything that may arise due to the author(s) internal dispute. Jurnal Logistik Indonesia will only communicate with the corresponding author.
5. Miscellaneous
Jurnal Logistik Indonesia will publish the article (or have it published) in the journal if the article’s editorial process is successfully completed. Jurnal Logistik Indonesia editors may modify the article to a style of punctuation, spelling, capitalization, referencing and usage that deems appropriate. The author acknowledges that the article may be published so that it will be publicly accessible and such access will be free of charge for the readers as mentioned in point 3.
Every accepted manuscript should be accompanied by "Copyright Transfer Agreement" prior to the article publication.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
