Determining Distribution Center Locations to Optimize Food Supply Chain Integration (A Case Study of an Agribusiness Company in Indonesia)

Authors

  • Yelita Anggiane Iskandar Logistics Engineering Department, Pertamina University, Jakarta
  • Nur Layli Rachmawati Logistics Engineering Department, Pertamina University, Jakarta
  • Adji Candra Kurniawan Logistics Engineering Department, Pertamina University, Jakarta
  • Ravi Prananda Kurniawan Logistics Engineering Department, Pertamina University, Jakarta
  • Mega Rizkah Sudiar Logistics Engineering Department, Pertamina University, Jakarta
  • Dedy Ramadhan Logistics Engineering Department, Pertamina University, Jakarta
  • Sayyid Firous Taufiqulhaqiem Logistics Engineering Department, Pertamina University, Jakarta
  • Andi Nur Shafirah Ramdhani Abidin Logistics Engineering Department, Pertamina University, Jakarta
  • Anissa Widiyanti Logistics Engineering Department, Pertamina University, Jakarta

DOI:

https://doi.org/10.31334/bijak.v20i1.3058

Keywords:

Facility Location, Distribution Center, Anylogistix Simulation, Green Field Analysis, Network Optimization,

Abstract

PT Asagri Selaras Asia is an agribusiness company in Jakarta, Indonesia that provides food supply for entrepreneurs in the tourism sector, such as hotels and restaurants. In running their business, the company has a supply chain network that effectively integrates suppliers, manufacturers, warehouses, and stores. Supply chain management optimization is deemed necessary to maximize efficiency in every process carried out at PT Asagri Selaras Asia. One of the processes that can be optimized is the determination of facility location. The right facility location can minimize distance, delivery time, and operational costs and optimize the company's profit. Currently, the contract period for the distribution center (DC) used by PT Asagri Selaras Asia is about to expire therefore a decision is needed regarding the determination of the DC location for the next period, either extending the current DC contract or moving to a new location. This study aims to maximize the company's profit by comparing the profit obtained under existing and alternative DC, and the proposed DC from the experimental results using the Green Field Analysis (GFA) method. This study also aims to determine the feasibility of the three DC locations using the Network Optimization (NO) method with Anylogistix software. Based on the data analysis, the new DC is recommended to be located in the West Pejaten area, South Jakarta with latitude -6.2729150574 and longitude 106.8230798418 which will give an increase in profit of 80.53% compared to the existing DC.

References

Anwar, F. (2015). Analisis Kualitas Pelayanan Terminal Kargo Bandara Dengan Jaringan Probabilistik. Jurnal Perhubungan Udara, 59-68.

Aritonang, L. R. (2005). Kepuasan Pelanggan. Jakarta: PT Gramedia Pustaka Utama.

Asagri. (2020). Profil Perusahaan. (Asagri) Retrieved from https://www.asagri.co.id/profil/

Bastyan, E. (2017). Analisa Kualitas Layanan Bongkar Muat Di Terminal Petikemas Surabaya Dengan Metode Servqual Dan QFD. Surabaya: Institut Teknologi Sepuluh Nopember.

Handayani, I. S. (2022). Gudang Cikampek, Buana Kota Baru Raya. (rumah123.com) Retrieved from https://www.rumah123.com/properti/karawang/war2848177/

I Made Suska, N. B. (2013). Analisis Kualitas Pelayanan Pas Bandara Internasional Ngurah Rai Dengan Menggunakan Model Servqual. Jurnal Spektran, I.

Ivanov, D. (2018). Supply Chain Simulation and Optimization with anyLogistix. Berlin School of Economics and Law. Retrieved from About Us: Unilever: https://www.unilever.co.id/about/who-we-are/introduction-to-unilever/

Jakfar, A. A., Syarif, M., & Hidayat, R. (2020). Development Strategy for the Master Plan of Maize Commodities. Culture Heritage, Education, Sustainable Tourism, and Innovation Technologies. Culture Heritage, Sustainable Tourism, and Innovation Technologies.

Johnson, M. E., & Pyke, D. F. (1999). Supply Chain Management. In Encyclopedia of Operations Research and Management Science (pp. 1505-1517). Hanover.

Kotler, P. &. (2012). Marketing Management (14th ed.). In N. Jersey (Ed.). Prentice Hall.

Kriswanto, I. &. (2004). Pemetaan Prefensi Konsumen Supermarket dengan Metode Kano berdasarkan Dimensi SERVQUAL. Jurnal Teknik Industri, 37-46.

Marmolejo-Saucedo, J. A., Rodriguez-Aguilar, R., & Manuell-Barrera, O. S. (2019). Technical evaluation of the opening of facilities in the pharmaceutical industry: optimization to supply chain in Mexico. IFAC PapersOnLine, 52(13), 2692-2697.

Marmolejo-Saucedo, J., Rodriguez-Aguilar, R., & Manuell-Barrera, O. S. (2010). Technical evaluation of the opening of facilities in the pharmaceutical industry: optimazation to supply chain in mexico. Science Direct.

Melo, M., Nickel, S., & Saldanha-da-Gama, F. (2009). Facility location and supply chain management – A review. European Journal of Operational Research, 196, 401-412.

Nasution, M. (2005). Manajemen Mutu Teroadu. Ghalia Indonesia: Edisi kedua.

Parasuraman, A. Z. (1998). SERVQUAL: a multiple item scale for Measuring consumer perceptions of service quality. Journal of, 64, 12-40.

Paul, F. (2021). Rumah Sewa Pejaten Barat. (OLX) Retrieved from https://www.olx.co.id/item/rumah-pasar-minggu-pejaten-sgt-strategis-dekat-jln-tol-n-jln-raya-iid-850879370

Pertamina. (2021). Daftar Harga BBK TMT 18 September 2021. (Pertamina) Retrieved from https://www.pertamina.com/id/news-room/announcement/daftar-harga-bbk-tmt-18-september-2021-Zona-all

Sanjaya, Y. (2020). Perbandingan Konsumsi BBM Mitsubishi Xpander vs Wuling Confero, Sang MPV Fenomenal. (AutoFun) Retrieved from https://www.autofun.co.id/berita/perbandingan-konsumsi-bbm-mitsubishi-xpander-vs-wuling-confero-sang-mpv-fenomenal-5238

Sari, A. K. (2017). Pengaruh Kualitas Pelayanan Pelabuhan Terhadap Kepuasan Pelanggan Bongkar Muat Pada Pt Pelabuhan Indonesia I (Persero) Cabang Belawan. Medan: Universitas Sumatra Utara.

Sitti Subekti, H. R. (2012). Kualitas Tingkat Pelayanan Minimum Terminal Kargo Domestik Bandar Udara. Jurnal Transportasi, 12, 185-194.

Supranto, J. (2011). Pengukuran Tingkat Kepuasan Pelanggan untuk Meningkatkan Pangsa Pasar. Jakarta: PT. Rineta Cipta.

Wijaya, T. (2011). Manajemen Kualitas Jasa. Jakarta: Salemba Empat .

al industry: optimization to supply chain in Mexico. IFAC PapersOnLine, 52(13), 2692-2697.

Marmolejo-Saucedo, J., Rodriguez-Aguilar, R., & Manuell-Barrera, O. S. (2010). Technical evaluation of the opening of facilities in the pharmaceutical industry: optimazation to supply chain in mexico. Science Direct.

Melo, M., Nickel, S., & Saldanha-da-Gama, F. (2009). Facility location and supply chain management – A review. European Journal of Operational Research, 196, 401-412.

Nasution, M. (2005). Manajemen Mutu Teroadu. Ghalia Indonesia: Edisi kedua.

Parasuraman, A. Z. (1998). SERVQUAL: a multiple item scale for Measuring consumer perceptions of service quality. Journal of, 64, 12-40.

Paul, F. (2021). Rumah Sewa Pejaten Barat. (OLX) Retrieved from https://www.olx.co.id/item/rumah-pasar-minggu-pejaten-sgt-strategis-dekat-jln-tol-n-jln-raya-iid-850879370

Pertamina. (2021). Daftar Harga BBK TMT 18 September 2021. (Pertamina) Retrieved from https://www.pertamina.com/id/news-room/announcement/daftar-harga-bbk-tmt-18-september-2021-Zona-all

Sanjaya, Y. (2020). Perbandingan Konsumsi BBM Mitsubishi Xpander vs Wuling Confero, Sang MPV Fenomenal. (AutoFun) Retrieved from https://www.autofun.co.id/berita/perbandingan-konsumsi-bbm-mitsubishi-xpander-vs-wuling-confero-sang-mpv-fenomenal-5238

Sari, A. K. (2017). Pengaruh Kualitas Pelayanan Pelabuhan Terhadap Kepuasan Pelanggan Bongkar Muat Pada Pt Pelabuhan Indonesia I (Persero) Cabang Belawan. Medan: Universitas Sumatra Utara.

Sitti Subekti, H. R. (2012). Kualitas Tingkat Pelayanan Minimum Terminal Kargo Domestik Bandar Udara. Jurnal Transportasi, 12, 185-194.

Supranto, J. (2011). Pengukuran Tingkat Kepuasan Pelanggan untuk Meningkatkan Pangsa Pasar. Jakarta: PT. Rineta Cipta.

Wijaya, T. (2011). Manajemen Kualitas Jasa. Jakarta: Salemba Empat.

Downloads

Published

2023-03-15

Issue

Vol. 20 No. 1: March 2023

Section

Articles

License

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License

Please find the rights and licenses in Majalah Ilmiah Bijak By submitting the article/manuscript of the article, the author(s) agree with this policy. No specific document sign-off is required.

  1. License

The commercial use of the article will be governed by the Creative Commons Attribution license as currently displayed on Creative Commons Attribution-ShareAlike 4.0 International License.

2. Author(s)' Warranties

The author warrants that the article is original, written by stated author(s), has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary written permissions to quote from other sources have been obtained by the author(s).

3. User Rights

Majalah Ilmiah Bijak spirit is to disseminate articles published are as free as possible. Under the Creative Commons license, Majalah Ilmiah Bijak permits users to copy, distribute, display, and perform the work for non-commercial purposes only. Users will also need to attribute authors and Majalah Ilmiah Bijak on distributing works in the journal and other media of publications.

4. Co-Authorship

If the article was jointly prepared by more than one author, any authors submitting the manuscript warrants that he/she has been authorized by all co-authors to be agreed on this copyright and license notice (agreement) on their behalf, and agrees to inform his/her co-authors of the terms of this policy. Jurnal Bijak will not be held liable for anything that may arise due to the author(s) internal dispute. Majalah Ilmiah Bijak will only communicate with the corresponding author.

5. Miscellaneous

Majalah Ilmiah Bijak will publish the article (or have it published) in the journal if the article’s editorial process is successfully completed. Jurnal Bijak editors may modify the article to a style of punctuation, spelling, capitalization, referencing and usage that deems appropriate. The author acknowledges that the article may be published so that it will be publicly accessible and such access will be free of charge for the readers as mentioned in point 3.

 

Every accepted manuscript should be accompanied by "Copyright Transfer Agreement"prior to the article publication.